Unit Editor
OverviewOpening the Unit EditorUnit Editor InterfaceLaying Out RoomsSetting Room PropertiesSetting Unit Edges & EntranceImporting a Unit from DXFPreparing your DXF fileSaving a TemplateValidation ErrorsCommon mistakes and valid entrance placements
Overview
The Unit Editor is where you design the layout of a residential unit template. You can lay out rooms, assign space types, set the unit edges and entrance, and save the template to your Unit Library so it can be reused across your projects.
To browse, manage and add unit templates to your scenarios, see Unit Library.
Opening the Unit Editor
The Unit Editor opens when you create a new unit template or edit an existing one from the Unit Library.
A. In the Unit Library, click + Create New Template.

B. Enter the basic parameters for the unit:
- Template Name
- Width (e.g., 12m)
- Depth (e.g., 8m)
- Height (e.g., 2.8m)
You can also choose to put in arbitrary values and continue to the next step.
C. The template opens in the Unit Editor.

Unit Editor Interface
The Unit Editor is a grid-based workspace for planning the spaces in your unit.

- Left Hand Panel – The list of spaces and elements in the unit
- Canvas – The unit layout, where you can select, move and resize spaces.
- Right Hand Panel – The properties of the selected space, such as its space type, dimensions and area, and the prompts to set the unit edges and entrance
You can toggle walls, flooring and wireframes on and off for better visual control.
Laying Out Rooms
A. Add rooms to the unit and arrange them on the canvas.
B. Adjust room dimensions by dragging the room edges, or by entering values in the Right Hand Panel.
C. To add a corridor, click the plus (+) icon under the Space section.

Setting Room Properties
Select a room to:
- Rename it, or assign a space type (e.g., bedroom, living room, kitchen)
- Edit its dimensions (width and depth)
- View its calculated area
Every room must have a space type assigned before the template can be saved.
Setting Unit Edges & Entrance
To complete a template, you must set the unit edges and the unit entrance using the prompts in the Left Hand Panel. This defines how the unit sits within a building and where it is accessed from.
- Corridor edge – The edge of the unit that faces the corridor.
- Adjacent edge – The edge of the unit that is shared with a neighbouring unit.
- Unit entrance – The entrance into the unit. It must be placed on the corridor edge.
The diagram below shows how unit edges and entrances relate to corridors and circulation cores in a building.

_(1)-04.jpg?table=block&id=11181388-1817-42a9-941d-c925ba28254f&cache=v2&width=1600)
Image placeholder: UnitEditor_edges_entrance.png (Left Hand Panel prompts for unit edges and entrance)
Importing a Unit from DXF
If you already have unit layouts drawn in CAD, you can import them from a DXF file instead of redrawing them in the Unit Editor. The rooms and walls in the file are converted into spaces in the Unit Editor.
A. In the Unit Editor, choose to import a DXF file.
B. Select the DXF file of the unit from your computer.
C. Review the imported spaces, then finish the template by assigning space types and setting the unit edges and entrance.

Preparing your DXF file
For the best results:
- Draw each room and wall as a closed polyline. Walls drawn as two parallel lines are not detected.
- Put rooms, walls and the unit boundary on clearly named layers (e.g., Bedroom, Bathroom, Wall, Unit Boundary).
- Use straight lines only. Curved polylines are skipped.
- Save the file as an ASCII DXF. Binary DXF files are not supported.
- Furniture and fixtures inside blocks are not imported.
If your file does not include a unit boundary, you can draw it in Podium after importing.
Saving a Template
Once all the required steps are complete, click Save. The template appears in your Unit Library with:
- A layout thumbnail
- Its area in m² or ft²
- A room summary
Saved templates can be reused across your projects.
Validation Errors
Error messages appear when a required step has not been completed or the unit has not been drawn correctly.
- Overlapping spaces

Spaces are overlapping. Ensure that spaces are placed correctly without any overlapping boundaries or lines.
- Invalid/empty space type
_(3).png?table=block&id=279e3962-9b60-80d5-bf97-dc67647b9f2e&cache=v2&width=1600)
No space type has been assigned to the room. Select a space type (e.g., bedroom, living room, kitchen) from the criteria panel.
- Isolated space
_(4).png?table=block&id=279e3962-9b60-80bf-ad4f-d97fb6952f3f&cache=v2&width=1600)
The room is isolated and needs to be connected to the other spaces.
- Missing unit variant(s)

The template needs to be saved. To save the template, the unit edges (adjacent edge and corridor edge) and the unit entrance must be set.
- Invalid entrance placement

The unit entrance is not on a corridor edge. Drag the unit entrance and place it along the corridor edge.
Common mistakes and valid entrance placements

